Enter the dimensions of your countertops.
Include any openings for sink or stove tops.
Water: required entry. Typical
amount for countertops is 30% for GFRC premix (spray up/ hand pack
application) and 25% for SCC premix (simple pour application).
Stage II accelerator: (makes the mix set faster) typical amount is 2-5%
2% = 25% more next day strength, plenty of working time after mixing
5% = 60% more next day strength, reduces working time to 20 minutes so once it is mixed get it
the form asap. Follow directions on TDS sheet.
Hydration Stabilizer: (makes the mix set slower for more working time)
amount is 0.2-0.5%.
0.2% adds 10-15 minutes to the working time at 75-90F
0.5% adds 45-60 minutes more working time at 75-90F
Follow directions on TDS sheet. *NOTE* use a drill and mixing paddle to blend Hydration
into the water before adding water to your mix.
Fiber: (reinforcement to prevent structural cracking) Typical amount is 3%
½” OR ¾”. HD anticrack (invisible in the mix and
used to prevent micro cracks when casting a face coat and back coat separately) Typical amount
Follow directions on TDS sheet *NOTE* add fiber after you have mixed the rest of the ingredients
Integral Color: Select your colors below. Typical amount is 0.5-5%. See
color representations by clicking “select” below. *NOTE* several factors affect the actual color
outcome and samples should be made prior to casting to verify actual color.
Batch: To view your order in any batch size (in lbs).